Tag Archives: bevel helical gearbox

China high quality High Torque Capacity Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers worm gearbox calculation

Product Description

Product Description

high torque capacity stainless steel agriculture bevel gearbox Planetary helical gearboxes reducers

HangZhou Fubao Electromechanical Technology Co., Ltd. bevel gearbox Planetary helical gearboxes Reducer is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

bevel gearbox Planetary helical gearboxes Reducer characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the bevel gearbox Planetary helical gearboxes Reducer. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.

Compared with other reduction machines, bevel gearbox Planetary helical gearboxes Reducer machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics,bevel gearbox Planetary helical gearboxes Reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Product Parameters

 

WVB/WVBL series parameters Model number WVB042/WVBL50 WVB60/WVBL70 WVB/WVBL90 WVB/WVBL120 WVB142/WVBL155 WVB180/WVBL205 WVB220/WVBL235
Rated output torque 13-17Nm 32-48Nm 80-125Nm 165-265Nm 280-530Nm 480-960Nm 900-1360Nm
Reduction ratio L1: 3, 4, 5, 7, 10 L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100
Planetary gear backlash L1: P1≤3 P2≤5  L2: P1≤5 P2≤7

 

Detailed Photos

Product Details

Other products

 

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, Semiconductor Manufacturing Equipment
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Customization:
Available

|

worm reducer

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducerAGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducerAGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China high quality High Torque Capacity Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers   worm gearbox calculationChina high quality High Torque Capacity Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers   worm gearbox calculation
editor by CX 2023-06-13

China high quality K Type Helical Bevel Gearbox worm gearbox application

Product Description

Technical Parameter

Housing material HT200 high-strength cast iron(EWK37, EWK47, EWK57, EWK67, EWK77, EWK87)
Housing material HT250 High strength cast iron(EWK97, EWK107, EWK127, EWK157, EWK167, EWK187)
Gear material 20CrMnTi
Gear Surface&hardness HRC58°-62°
Gear core hardness HRC33°-78°
Input/Output shaft material 40Cr
Gear Machining precision Accurate grinding 6-5 grade
Heat treatment Carburizing, Quenching etc
Efficiency Up to 92%
Noise(Max) 60-67dB
Installation type Foot mounted, flange mounted
Output type Solid shaft, Hollow shaft, splined hollow shaft, shrink disk
Bearing brand NSK, SKF, HRB, ZWZ etc
Oil seal brand NAK, KSK etc
Lubricant VG220
Motor IP55, F class
Motor shaft 40Cr, Carburizing, Quenching etc
Warranty 12months
Color Blue, Grey

 

 

Features
♦Specially designed for agitator. 
♦Compact structure, Integrated casting housing, low noise and long service life. 
♦High efficiency and low maintenance. 

Technical Data
Ratio I=8.1~191, combination of EWK/EWR is up to13459
Efficiency: 94%, and combination of EWK/EWR85%. 
Size EWK37~EWK187. 

Industrial Application
Power Plant Equipment
Metallurgical Industry
Metal Forming Machinery
Petrochemical Industry
Mining Machine
Hoisting Machinery
Construction Industry
Environmental Protection Industry
Cable Industry
Food Machinery

Certificates
Passed ” ISO 9001 International Quality System Certificate”, “Europe CE Certificate”, ” Swiss SGS Certificate”, “High-tech enterprise certificate of ZheJiang city”, “Excellent performance management enterprise of ZheJiang city”, etc. 
FAQ
1. Q: Can you make as per custom drawing? 
A: Yes, we offer customized service for customers. 
2. Q: Are you a factory or trading company? 
A. We are manufacturer in ZheJiang China. 
3. Q: What’s your MOQ? 
A: One piece. 
4. Q: What’s your production time? 
A: 7-15 working days after receiving payment. 
5. Q: What’s your payment terms? 
A: T/T, 30% payment in advance, 70% balance payment should be paid before shipping. 
6. Q: What’s your package? 
A: In wooden box packaging. 

ZheJiang CZPT Gear Reducer Co., Ltd., former a joint venture invested by is a ZheJiang CZPT GROUP and Well Company of America. We are professional manufacturer of the gear reducers and specialize in the gear reducers area in China for 20 years. CZPT has excellent R&D team, top-ranking production and test equipment. So we have the strong power in the developing and manufacturing the standards type as well as the customized type gear reducer for our customers. 

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Right-Angle
Gear Shape: Bevel Gear
Step: Three-Step
Customization:
Available

|

worm reducer

Worm gear reducer gearbox

Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm reducer

low clearance

A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm reducer

easy to replace

An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

China high quality K Type Helical Bevel Gearbox   worm gearbox applicationChina high quality K Type Helical Bevel Gearbox   worm gearbox application
editor by CX 2023-06-02

China 90 degree KM Series Helical Hypoid Gear reducer price mini bevel gearbox drive shaft gear box with Best Sales

Error:获取session失败,

worm reducer

Advantages and disadvantages of worm gear reducer gearbox

If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.

Hollow shaft worm gear reducer gearbox

Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer gearbox

The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer gearbox

R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm reducer

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China 90 degree KM Series Helical Hypoid Gear reducer price mini bevel gearbox drive shaft gear box     with Best Sales China 90 degree KM Series Helical Hypoid Gear reducer price mini bevel gearbox drive shaft gear box     with Best Sales
editor by CX 2023-04-23

China SA37 Series Helical Bevel Worm Gearboxes worm gearbox calculation

Product Description

S collection Helical Geared Motor Traits

1. Characteristics:

  1. Higher performance: 75%-eighty%
  2. Large technological innovation: the helical gear and a worm equipment mixed with an built-in transmission to increase the torque and effectiveness.
  3. High precision: the gear is produced of higher-quality alloy steel forging, carbonitriding and hardening therapy, grinding procedure to guarantee higher precision and steady managing.
  4. Large interchangeability: highly modular, serial design, powerful flexibility and interchangeability.

two. Complex parameters
 

Ratio six.8-288
Input energy .twelve-22KW
Output torque 11-4530N.m
Output pace five-206rpm
Mounting type Foot mounted, foot mounted with CZPT shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined gap, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. 
Enter Technique Flange enter(AM), shaft input(Advert), inline AC motor input, or AQA servo motor
Brake Release HF-handbook release(lock in the brake release position), HR-handbook release(autom-atic braking situation)
Thermistor TF(Thermistor defense PTC thermisto)
TH(Thermistor safety Bimetal swotch)
Mounting Place M1, M2, M3, M4, M5, M6
Kind S37-S97
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm,
Housing content HT200 higher-power cast iron from R37,47,fifty seven,67,seventy seven,87
Housing content HT250 High power forged iron from R97 107,137,147,
157,167,187
Heat treatment technology carbonitriding and hardening remedy
Single Stage Performance seventy five%-eighty%
Lubricant VG220
Defense Class IP55, F class

About Us

ZheJiang CZPT Drive Co.,Ltd,the predecessor was a condition-owned armed forces mould organization, was established in 1965. CZPT specializes in the comprehensive power transmission answer for substantial-stop tools producing industries based on the aim of “System Item, Application Design and Professional Service”.
Starshine have a sturdy complex drive with more than 350 staff at existing, such as in excess of 30 engineering technicians, 30 quality inspectors, masking an area of 80000 square CZPT and varieties of sophisticated processing devices and screening equipments. We have a very good basis for the sector software growth and service of substantial-end speed reducers & variators proudly owning to the provincial engineering technologies research heart,the lab of gear speed reducers, and the foundation of modern R&D.

Our Team

High quality Handle
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

three. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

four. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

five. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

six. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
merchandise is a product inspection to determine the qualified products.

seven. Certification.

Packing

Delivery

 

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Machinery, Agricultural Machinery, Dumbwaiter, Sugar Mills, and Kinds of Equipments
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Lower Rotation Speed
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Oscillating Base Type
Step: Three-Step

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/
To Be Negotiated 1 Piece
(Min. Order)

###

Application: Machinery, Agricultural Machinery, Dumbwaiter, Sugar Mills, and Kinds of Equipments
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Lower Rotation Speed
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Oscillating Base Type
Step: Three-Step

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

Is a worm gear reducer gearbox right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China SA37 Series Helical Bevel Worm Gearboxes     worm gearbox calculationChina SA37 Series Helical Bevel Worm Gearboxes     worm gearbox calculation
editor by CX 2023-04-19

China ND Worm Agricultural Machinery Gearbox Motor Car Tractor Precision Oil Pump Jack Reducer Bevel Helical Reverse Gearbox Engine worm gearbox calculation

Product Description

Item Description

Business Profile

In 2571, HangZhou CZPT Machinery Co.,ltd was recognized by Ms. Iris and her 2 associates(Mr. Tian and Mr. Yang) in HangZhou metropolis(ZHangZhoug province, China), all 3 Founders are engineers who have a lot more than averaged 30 years of expertise. Then since the needs of enterprise expansion, in 2014, it moved to the current Xihu (West Lake) Dis. Industrial Zone (HangZhou town, ZHangZhoug province, China).

Via our well-acknowledged manufacturer ND, CZPT Equipment provides agricultural options to agriculture machinery company and distributors around the world via a entire line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, generate shafts, sheet steel, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and so forth. Products can be custom-made as ask for.

We, CZPT equipment proven a complete quality administration method and product sales support network to offer customers with large-high quality items and satisfactory services. Our goods are offered in 40 provinces and municipalities in China and 36 countries and locations in the globe, our principal industry is the European market.

Certifications

Our Manufacturing unit

Sample Space

Why choose us?

1) Customization: With a powerful R&D group, and we can build products as necessary. It only will take up to 7 times for us to design a set of drawings. The creation time for new merchandise is typically fifty times or less.

two) Quality: We have our own full inspection and tests products, which can ensure the quality of the items.

3) Potential: Our once-a-year creation capacity is more than 500,000 sets, also, we also take small amount orders, to meet up with the demands of distinct customer’s buy quantities.

4) Service: We focus on supplying high-good quality products. Our products are in line with worldwide specifications and are largely exported to Europe, Australia, and other nations and areas.

5) Cargo: We are close to HangZhou and ZheJiang ports, to supply the quickest transport services.
 

Packaging & Shipping and delivery

FAQ

Q: Are you a investing firm or manufacturer?
A: We’re factory and providing gearbox ODM & OEM services for the European market for far more than ten years

Q: Do you offer samples? is it free or extra?
A: Indeed, we could offer you the sample for totally free charge but do not pay out the expense of freight.

Q: How lengthy is your shipping time? What is your phrases of payment?
A: Generally it is 40-45 times. The time might fluctuate based on the item and the amount of customization.
For standard goods, the payment is: thirty% T/T in progress,harmony just before shipment.

Q: What is the precise MOQ or price for your item?
A: As an OEM business, we can supply and adapt our goods to a broad assortment of needs.
Hence, MOQ and price tag might tremendously fluctuate with size, substance and even more specifications For occasion, costly goods or standard items will typically have a reduce MOQ. Please speak to us with all relevant information to get the most correct quotation.

If you have one more issue, make sure you feel free to get in touch with us.

US $10-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Straight Bevel
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:
US $10-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Straight Bevel
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm reducerHollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducerBrass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China ND Worm Agricultural Machinery Gearbox Motor Car Tractor Precision Oil Pump Jack Reducer Bevel Helical Reverse Gearbox Engine     worm gearbox calculationChina ND Worm Agricultural Machinery Gearbox Motor Car Tractor Precision Oil Pump Jack Reducer Bevel Helical Reverse Gearbox Engine     worm gearbox calculation
editor by czh 2023-02-02

China Solid Shaft Output S Series Helical Worm Gearbox with Motor bevel vs worm gearbox

Item Description

Strong Shaft Output S Sequence Helical Worm Gearbox with Motor

1.Technical data

Input power Ratio Input speed Torque Transmission stage Mounting type
.18~22kW nine.96~244.74(MAX:4606) 1400rpm
900rpm
700rpm
ninety~4000N.m 2stage
3stage
Foot mounted
Flange mounted

two.Input power rating and permissible torque

Dimension 37 forty seven fifty seven 67 seventy seven 87 ninety seven
Framework S   SA   SF   SAF   SAT   SAZ
Input Power(kW) .18~.seventy five .18~1.five .eighteen~three .25~5.5 .55~7.five .seventy five~fifteen one.5~22
Ratio ten.27~one hundred sixty five.71 eleven.forty six~244.seventy four ten.seventy eight~196.21 eleven.55~227.20 nine.96~241.09 11.83~223.26 12.75~230.forty eight
Permissible Torque(N.m) ninety a hundred and seventy 300 520 1270 2280 4000

 
 
three.Gear unit weight

Measurement 37 47 57 67 seventy seven 87 ninety seven
Weight(kg) 7 ten 14 26 fifty one hundred a hundred and seventy

 

4.Constructions of S series gearbox

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Limited-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

5.Area Gear Box’s Usage
1. Metallurgy 2 Mine 3 Machine 4 Energy 5 Transportation 6 Water Conserbancy 7 Tomacco 8 Pharmacy 9 Printing Deal 10 Chemical industry…

six.Our companies:

Pre-sale solutions 1. Decide on gear model.
2.Layout and manufacture items according to clients’ specific necessity.
three.Teach technological personal for clients
Services throughout marketing 1.Pre-verify and acknowledge goods in advance of shipping.
2. Aid clientele to draft resolving ideas.
After-sale services 1.Help clientele to get ready for the initial construction scheme.
two. Practice the very first-line operators.
3.Consider initiative to get rid of the difficulty speedily.
4. Supply complex exchanging.

seven.S collection gearbox are available in the following types:
(1) SY
Foot mounted helical worm gearbox with strong shaft

(2) SAY
Helical worm gearbox with hollow shaft

(3) SAZY
Little flange mounted helical worm gearbox with hollow shaft

(4) SA (S,SF,SAF,SAZ)Y
Assemble users’ motor or specific motor, flange is essential

(5) SFY
Flange mounted helical worm gearbox with reliable shaft

(6) SAFY
Flange mounted helical worm gearbox with hollow shaft

(7) SATY
Torque arm mounted helical worm gearbox with hollow shaft

(8) S (SF,SA,SAF,SAZ) S
Shaft enter helical worm gearbox

(9) SA (S,SF,SAF,SAZ)RY
Combined helical worm gearbox

(ten) SA (S,SF,SAF,SAZ)SR
Shaft enter combined helical worm gearbox

8.Item photograph:

nine.Our firm :
AOKMAN was founded in 1982, which has far more than 36 years in R & D and production of gearboxes, gears, shaft, motor and spare parts.
We can offer you the proper resolution for uncountable purposes. Our merchandise are commonly employed in the ranges of metallurgical, steel, mining, pulp and paper, sugar and liquor marketplace and numerous other types of machines with a sturdy existence in the worldwide marketplace.
AOKMAN has turn out to be a reputable provider, CZPT to provide substantial good quality gearboxes.With 36 years encounter, we assure you the utmost trustworthiness and safety for equally product and solutions.

ten.Buyer browsing:

eleven.FAQ:
1.Q:What types of gearbox can you produce for us?
A:Major merchandise of our business: UDL series velocity variator,RV collection worm equipment reducer, ATA sequence shaft mounted gearbox, X,B series equipment reducer,
P collection planetary gearbox and R, S, K, and F series helical-tooth reducer, a lot more
than 1 hundred versions and countless numbers of technical specs
two.Q:Can you make as for every custom made drawing?
A: Indeed, we offer you customized services for consumers.
three.Q:What is your phrases of payment ?
A: thirty% Progress payment by T/T soon after signing the contract.70% ahead of shipping
four.Q:What is your MOQ?
A: 1 Set

If you are interested in our solution, welcome you contact me.
Our crew will assist any require you may possibly have.

US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Industry
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Input power Ratio Input speed Torque Transmission stage Mounting type
0.18~22kW 9.96~244.74(MAX:4606) 1400rpm
900rpm
700rpm
90~4000N.m 2stage
3stage
Foot mounted
Flange mounted

###

Size 37 47 57 67 77 87 97
Structure S   SA   SF   SAF   SAT   SAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000

###

Size 37 47 57 67 77 87 97
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Industry
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Input power Ratio Input speed Torque Transmission stage Mounting type
0.18~22kW 9.96~244.74(MAX:4606) 1400rpm
900rpm
700rpm
90~4000N.m 2stage
3stage
Foot mounted
Flange mounted

###

Size 37 47 57 67 77 87 97
Structure S   SA   SF   SAF   SAT   SAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000

###

Size 37 47 57 67 77 87 97
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

Is a worm gear reducer gearbox right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Solid Shaft Output S Series Helical Worm Gearbox with Motor     bevel vs worm gearboxChina Solid Shaft Output S Series Helical Worm Gearbox with Motor     bevel vs worm gearbox
editor by czh 2023-01-21

china factory Such Worm Gearbox 12/47 Helical Bevel Gear Agricultural Machinery Tractor Drive Axle Spiral Bevel Gear manufacturers

Product Description

These kinds of Worm Gearbox twelve/47 CZPT cal Bevel Gear Agricultural CZPT ry Tractor CZPT Axle Spiral Bevel Gear
1.Business: HangZhou CZPT CZPT ry Business & CZPT Co., Ltd.
2. After-sale services
3.OEM support
four.Product No: twelve/47
5.Bundle: Boxes, /Cartons, CZPT Pallents 
six.Work for :Agricultural CZPT ry Tractor Axle CZPT Gear

Max eighteen-twenty
Hardness HRC 58-62
Meterial Carbon metal these kinds of as 20CrMnTiH(Can be CZPT ized)
Module M1-M10
Precision Course 5-eight
Certificate ISO SGS

Treatment  Carburizing,Hardening,tempering,Large frequency Therapy,black coating,zincing,nickelage

 

Firm Profile

HangZhou CZPT CZPT ry is a skilled manufacture of spiral bevel gear. The firm has CNC milling device, the GLEASON milling equipment, rolling inspection machine, gear measuring middle, a entire established of metallographic evaluation, inspection equipment and other associated CZPT d products.
Our organization owns gear measuring center outfitted with CZPT d testing devices this sort of as contourgraph, CZPT measuring microscope and complete established netlaaographic evaluation detector. In accordance to CZPT complex specifications and by way of methods of sampling, specific inspection and re-examination, multi-indexes of gears like observation, measurement and tracking can be concluded.
With CZPT higher quality goods, high believability and CZPT y cooperation, aiming to be a highly specialized gear manufacturer of substantial amount and all-directional service,we are looking forward to your  business negotiation and CZPT promising cooperation.

FAQ

Q1: Are your products common? 
A: Our product is regular, if you have specific desire, pls tell us the particulars. 
Q2: What is you principal types? 
A: CZPT Autos like CZPT , Nissan, Hino , Mitsubishi, CZPT , Suzuki,Mazda and so forth. Agricutural CZPT ry and CZPT ctric Storage. 
Q3: If we do not locate what we want on your web site, what ought to we do? 
A: You can make contact with me directly by email for the descriptions and photographs of the merchandise you require, we will examine whether we have them. 
B: We create new items every month, and some of them have not been uploaded to web site in time. Or you can send out us sample by convey, we will create this merchandise for bulk acquiring. 
This fall: What is your phrases of payment?
A: T/T 30% as deposit, and 70% ahead of shipping and delivery. We’ll demonstrate you the pictures of the items and packages before you shell out the equilibrium.
Q5:Do you examination all your goods ahead of shipping?
Of course, we have one hundred% take a look at just before supply.

 

Previously we mentioned that when two gears mesh, the scaled-down one particular is called the pinion. A rack is a straight bar with equipment teeth that meshes with the pinion. So you can probably imagine how rack and pinion gears are employed to convert rotation into linear motion. A ideal example of this is the steering system on numerous vehicles. The steering wheel rotates a gear, which engages the rack. As the gear turns, it slides the rack both to the appropriate or left, depending on which way you flip the wheel.
china  factory Such Worm Gearbox 12/47 Helical Bevel Gear Agricultural Machinery Tractor Drive Axle Spiral Bevel Gear manufacturers

china Custom Such Worm Gearbox 7/36 Spiral Bevel Gear Car Gear for Ford Truck Ratio Helical Bevel Gear manufacturers

Solution Description

These kinds of Worm Gearbox 7/36 Spiral Bevel Gear Automobile Gear for CZPT CZPT Ratio CZPT cal Bevel Equipment

one.Company: HangZhou CZPT CZPT ry Industry & CZPT Co., Ltd.
two. After-sale companies
3.OEM service
4.Model No: 7/36
five.Package: Boxes, Cartons, CZPT Pallents
6.Work for : For CZPT       

Max eighteen-20
Hardness HRC fifty eight-62
Meterial Carbon metal this sort of as 20CrMnTiH(Can be CZPT ized)
Module M1-M10
Precision Class 5-eight
Certification ISO SGS

Treatment  Carburizing,Hardening,tempering,High frequency Therapy,black coating,zincing,nickelage

 

Business Profile

HangZhou CZPT CZPT ry is a professional manufacture of spiral bevel equipment. The firm has CNC milling equipment, the GLEASON milling equipment, rolling inspection device, gear measuring centre, a full established of metallographic investigation, inspection gear and other connected CZPT d products.
Our company owns gear measuring center geared up with CZPT d tests devices this sort of as contourgraph, CZPT measuring microscope and complete established netlaaographic investigation detector. In accordance to CZPT specialized needs and by way of techniques of sampling, specific inspection and re-examination, multi-indexes of gears like observation, measurement and monitoring can be concluded.
With CZPT higher good quality products, higher credibility and CZPT y cooperation, aiming to be a highly specialized gear company of large degree and all-directional support,we are looking forward to your  business negotiation and CZPT promising cooperation.

FAQ

Q1: Are your goods standard? 
A: Our design is common, if you have particular need, pls tell us the information. 
Q2: What is you main categories? 
A: CZPT Cars like CZPT , Nissan, Hino , Mitsubishi, CZPT , Suzuki,Mazda etc. Agricutural CZPT ry and CZPT ctric Storage. 
Q3: If we do not discover what we want on your site, what should we do? 
A: You can speak to me immediately by e-mail for the descriptions and pictures of the merchandise you need, we will verify regardless of whether we have them. 
B: We produce new items each and every month, and some of them have not been uploaded to web site in time. Or you can send us sample by categorical, we will build this item for bulk getting. 
This autumn: What is your terms of payment?
A: T/T thirty% as deposit, and 70% ahead of delivery. We are going to present you the pictures of the items and packages before you shell out the balance.
Q5:Do you test all your items before supply?
Indeed, we have a hundred% check prior to shipping.

 

A rack is a part of a cylindrical disk with an infinite radius, the area of which is reduce with involute tooth. The racks are specifically mated to spur gears with the very same module, stress angle, and preferred encounter width. EP offers racks in a variety of materials, configurations, modules, and lengths. A distinctive function of our racks is that most of them come with concluded items. This type of generation makes it possible for numerous racks to be connected stop to conclude to generate a ongoing duration of racks. Many of our offerings enable for secondary functions this sort of as shortening lengths, including threaded holes, or implementing heat treatment. Our merchandise also contain products that have completed some of these secondary operations.
china  Custom Such Worm Gearbox 7/36 Spiral Bevel Equipment Car Equipment for Ford Truck Ratio Helical Bevel Gear companies

in Djibouti Djibouti sales price shop near me near me shop factory supplier K Series Helical Bevel Gearbox for Conveyor manufacturer best Cost Custom Cheap wholesaler

  in Djibouti Djibouti  sales   price   shop   near me   near me shop   factory   supplier K Series Helical Bevel Gearbox for Conveyor manufacturer   best   Cost   Custom   Cheap   wholesaler

a specialized provider of a entire range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers. The new items incorporate a collection of higher-tech and high high quality chains and sprockets and gears, such as chains and gearboxes for agricultural machineries, metallurgical chains, escalator phase-chains, substantial-velocity tooth chains, timing chains, self-lubrication chains, amid which have type large pace tooth chain for vehicle department dynamic box and aerial chains fill in the blanks of chain in China. Our firm pays certain consideration to customers’ demands, listening to the particular specifications of each consumer and guaranteeing total fulfillment.

Sort: K series Helical EPTl Equipment EPTs
Design: K37-K187
Model identify: EPT
Coloration: Blue/Grey or on request
EPT: EPT250
Enter EPT: .12-200kw
Output torque: 10-61900N.m
Output speed: .08-261rpm
EPT: C ampU EPT,NSK,SKF or on request
Seal: SKF,CTY,CFW or on ask for
Origin: EPT, EPT
Guarantee: 1 12 months

Features of items

1. Highly StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Modular Designed: The items are effortlessly linked with and EPTn by different varieties of motors and different enter EPT. The same variety EPTed motor can be adapted to optioned EPTs of motors. It is therefore simple to understand distinct answer for different specifications.

2. Ratio: Highlighted numerous closely divided ratios and broad selection of them. Really huge final ratios can be obtained by way of mixed unites to achieve incredibly low output speeds.

three. Mounting Arrangement: No stringent limitation to the mounting arrangement.

4. High Power, Compact Dimension: EPTs are made of high energy cast iron. Gears and shaft EPTs are concluded with gasoline carburizing approach and specific grounding to sequentially get high loading potential of for every specific quantity.

five. EPT Services Daily life: UnEPTthe condition of correctly picking variety dimension and the typical routine maintenance and use, main components (assume individuals simply-disabled components) can last as EPT as up to far more than twenty five,000 hours. Easily-disabled parts incEPT lubricating oil, oil seals, and bearings.

six. Lower Sound: All key elements are finished by specifically machining, accurate assembly, and last but not least tested, and consequently, pretty minimal noise is reached.

seven. Substantial Efficiency: The effectiveness of EPT unit can achieve ninety five%, The effectiveness of worm EPT device can reach 89%.

8. Massive radial loading capacity.

nine. AXiHu (West Lake) Dis.al load potential of up to 5% of radial load.


(1) With exceptional high quality and Reasonable price tag

(2) Guarantee to delivery on time

(3) Risk-free, reputable, affordable and tough

(4) Secure EPT, peaceful operation

(5) High warmth-radiating effectiveness, substantial carrying capability

(6) Every single product need to be examined prior to sending

  in Djibouti Djibouti  sales   price   shop   near me   near me shop   factory   supplier K Series Helical Bevel Gearbox for Conveyor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Djibouti Djibouti  sales   price   shop   near me   near me shop   factory   supplier K Series Helical Bevel Gearbox for Conveyor manufacturer   best   Cost   Custom   Cheap   wholesaler

in Liege Belgium sales price shop near me near me shop factory supplier Helical Zerol Miter Gear Gears Set Motor Right Angle Spiral Bevel 90 Degree Hypoid Spiral Bevel Gearbox China Manufacturers Industrial manufacturer best Cost Custom Cheap wholesaler

  in Liege Belgium  sales   price   shop   near me   near me shop   factory   supplier Helical Zerol Miter Gear Gears Set Motor Right Angle Spiral Bevel 90 Degree Hypoid Spiral Bevel Gearbox China Manufacturers Industrial manufacturer   best   Cost   Custom   Cheap   wholesaler

Our items are made by present day computerized equipment and equipment. we have obtained the trust of purchasers around the world. With EPG brand name registered in a lot more than 70 countries like The united states , Europe , Japan and so on, it has companions among planet best enterprises, these kinds of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and many others.

Helical Zerol Miter Gear Gears Established EPT RigEPT Angle Spiral EPTl ninety Diploma Hypoid Spiral EPTl EPT EPT Manufacturers EPT

  in Liege Belgium  sales   price   shop   near me   near me shop   factory   supplier Helical Zerol Miter Gear Gears Set Motor Right Angle Spiral Bevel 90 Degree Hypoid Spiral Bevel Gearbox China Manufacturers Industrial manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Liege Belgium  sales   price   shop   near me   near me shop   factory   supplier Helical Zerol Miter Gear Gears Set Motor Right Angle Spiral Bevel 90 Degree Hypoid Spiral Bevel Gearbox China Manufacturers Industrial manufacturer   best   Cost   Custom   Cheap   wholesaler