Tag Archives: helical worm gearboxes

China high quality High Torque Capacity Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers worm gearbox calculation

Product Description

Product Description

high torque capacity stainless steel agriculture bevel gearbox Planetary helical gearboxes reducers

HangZhou Fubao Electromechanical Technology Co., Ltd. bevel gearbox Planetary helical gearboxes Reducer is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

bevel gearbox Planetary helical gearboxes Reducer characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the bevel gearbox Planetary helical gearboxes Reducer. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.

Compared with other reduction machines, bevel gearbox Planetary helical gearboxes Reducer machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics,bevel gearbox Planetary helical gearboxes Reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Product Parameters

 

WVB/WVBL series parameters Model number WVB042/WVBL50 WVB60/WVBL70 WVB/WVBL90 WVB/WVBL120 WVB142/WVBL155 WVB180/WVBL205 WVB220/WVBL235
Rated output torque 13-17Nm 32-48Nm 80-125Nm 165-265Nm 280-530Nm 480-960Nm 900-1360Nm
Reduction ratio L1: 3, 4, 5, 7, 10 L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100
Planetary gear backlash L1: P1≤3 P2≤5  L2: P1≤5 P2≤7

 

Detailed Photos

Product Details

Other products

 

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, Semiconductor Manufacturing Equipment
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Customization:
Available

|

worm reducer

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducerAGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducerAGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China high quality High Torque Capacity Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers   worm gearbox calculationChina high quality High Torque Capacity Stainless Steel Agriculture Bevel Gearbox Planetary Helical Gearboxes Reducers   worm gearbox calculation
editor by CX 2023-06-13

China 1400rpm Helical Gear Reducer,High Speed And Low Noise Nmrv Series Worm Gear Motor, NMRV 90 Gearboxes With Electric Motor worm gearbox design

Guarantee: 1 year
Relevant Industries: Building Substance Stores, Production Plant, Farms, Retail, Construction works , Meals & Beverage Retailers, Other
Weight (KG): nine
Tailored assist: OEM, ODM, OBM
Gearing Arrangement: Worm
Output Torque: 1.8-2430N.M
Enter Velocity: 1400rpm
Output Pace: 14-280rpm
Solution name: NMRV90 Gearbox Reducers
Software: Foods Equipment
Sort: Worm Drive
Coloration: Silver/blue or Personalized
Search phrases: NMRV equipment motor
Input Type: Mounting Motor
Ratio: 5~100
Substance of housing: Csting Iron
Output Form: Hollow Shaft/Solid Shaft Output
Packing: Box Packing/wooden box
Packaging Details: Cartons or wood situations
Port: HangZhou YanTian GuangZhou

Products Description Higher Pace WORM GEARBOX REDUCERS,Gear MOTORSone.large speed ratio range2.tiny volume,minimal fat ,saving place for mounting.3.higher effectiveness,large mechanical energy and large quality aluminum alloy housing4.prolonged lifestyle provider,massive output torque,low sounds and tiny vibration5.minimal temperature increase,omnibearing set up ,simple to join with other equipment.6.substantial have ability,classy apperance.7.CE standard,enter power can be .06KW-15KW8.steady transmission Solution Paramenters

Product Identify Nmrv Sequence Worm Gear Motor NMRV 90 Gearboxes With Electric Motor
ColorBlue/Silver Or On Customer Request
Ratio1:5 7.5
ModelNMRV25-NMRV150
Material of HousingCasting Iron or Aluminum alloy
BrandBeiji
Output KindHollow Shaft /reliable shaft
Bearing:C&U Bearing
IEC Flange56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON
SealNAK
Usages:Metallurgical business, mining business, FCL flange coupling versatile pin and bush coupling chemical sector, foodstuff business, beverage market, textile industry, packagingindustry, environmental security industry
NMRV-thirty-forty-.12KW56B14-FA1-B3-180°
NMRVRound flange enter030center dictance
040Reduction ratio0.12KWElectric motor power
56Motor frame numberB14Motor Mounting Flange Product
FA1Flange inputB3Installation strategy
180°Junction Box Angle
Business Profile About US HangZhou Jinhongda Transmission Gear Co., Ltd is a modern enterprise integrating market and trade. Our income office is positioned in HangZhou baoan district. A whole of fifteen staff are dependable for domestic and worldwide functions.In China, We has set up the Pearl River CZPT as the middle to include the nationwide revenue network. Our items are also exported to the United States, Germany, France, Holland, Spain, Korea, Japan, Saudi Arabia, Thailand and other countries and regions. Our manufacturing facility is situated in HangZhou, ZheJiang , masking an area of ten,000 square meters.Our manufacturing unit has dozens of professional CNC machining tools and many precision measuring products and far more than 100 pros.The organization has been adhering to scientific and technological innovation, research and introduction of innovative engineering, and continuously build new items to meet up with the marketplace demand from customers.The regular monthly generation capability reaches ten,000 models. Our primary products are BeiJi precision planetary reducer, R/ S/F/K collection helical gear reducer, RV reducer, Alloy Rear motorbike Sprocket small equipment reducer, medium gear reducer, forged iron worm gear reducer, CAM splitter and other transmission equipment.We can also supply OEM goods and specific purpose merchandise. We have a robust technical capability, has acquired ISO 9001:2008 good quality management technique certification and production in rigid accordance with the specifications. Our merchandise have been broadly used in petroleum, chemical equipment, plastic machinery, rubber machinery, food machinery, packaging equipment, a few-dimensional parking garage and assembly line and other equipment and gear fields, gained the greater part of users’ gratification and praise.If you have demands, remember to contact us. Certifications Why Select Us Packing and Transport Merchandise software scenarios FAQ Q: Are you a buying and selling firm or a maker ?A: We are a pace reducer gearbox maker in ZheJiang Province, China. Our firm owns the capacity ofmanufacturing,processing, creating and R&D. Q:What details ought to i tell you to affirm the worm gearbox?A:Product/Size,B:Ratio and output torque, C:Electrical power and flange sort,D:Shaft Path,E:Housing colour,F:Buy amount. Q: Can you customise in accordance to our needs?A: Indeed, we can style non-regular products according to customers’ drawings and samples. Q:What is the payment phrase?A:T/T and Paypal is used more,make sure you speak to us for particulars Q: How extended is the shipping and delivery date?A: 10 – 20 company times.

worm reducer

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China 1400rpm Helical Gear Reducer,High Speed And Low Noise Nmrv Series Worm Gear Motor, NMRV 90 Gearboxes With Electric Motor     worm gearbox designChina 1400rpm Helical Gear Reducer,High Speed And Low Noise Nmrv Series Worm Gear Motor, NMRV 90 Gearboxes With Electric Motor     worm gearbox design
editor by CX 2023-04-24

China SA37 Series Helical Bevel Worm Gearboxes worm gearbox calculation

Product Description

S collection Helical Geared Motor Traits

1. Characteristics:

  1. Higher performance: 75%-eighty%
  2. Large technological innovation: the helical gear and a worm equipment mixed with an built-in transmission to increase the torque and effectiveness.
  3. High precision: the gear is produced of higher-quality alloy steel forging, carbonitriding and hardening therapy, grinding procedure to guarantee higher precision and steady managing.
  4. Large interchangeability: highly modular, serial design, powerful flexibility and interchangeability.

two. Complex parameters
 

Ratio six.8-288
Input energy .twelve-22KW
Output torque 11-4530N.m
Output pace five-206rpm
Mounting type Foot mounted, foot mounted with CZPT shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined gap, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. 
Enter Technique Flange enter(AM), shaft input(Advert), inline AC motor input, or AQA servo motor
Brake Release HF-handbook release(lock in the brake release position), HR-handbook release(autom-atic braking situation)
Thermistor TF(Thermistor defense PTC thermisto)
TH(Thermistor safety Bimetal swotch)
Mounting Place M1, M2, M3, M4, M5, M6
Kind S37-S97
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm,
Housing content HT200 higher-power cast iron from R37,47,fifty seven,67,seventy seven,87
Housing content HT250 High power forged iron from R97 107,137,147,
157,167,187
Heat treatment technology carbonitriding and hardening remedy
Single Stage Performance seventy five%-eighty%
Lubricant VG220
Defense Class IP55, F class

About Us

ZheJiang CZPT Drive Co.,Ltd,the predecessor was a condition-owned armed forces mould organization, was established in 1965. CZPT specializes in the comprehensive power transmission answer for substantial-stop tools producing industries based on the aim of “System Item, Application Design and Professional Service”.
Starshine have a sturdy complex drive with more than 350 staff at existing, such as in excess of 30 engineering technicians, 30 quality inspectors, masking an area of 80000 square CZPT and varieties of sophisticated processing devices and screening equipments. We have a very good basis for the sector software growth and service of substantial-end speed reducers & variators proudly owning to the provincial engineering technologies research heart,the lab of gear speed reducers, and the foundation of modern R&D.

Our Team

High quality Handle
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

three. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

four. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

five. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

six. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
merchandise is a product inspection to determine the qualified products.

seven. Certification.

Packing

Delivery

 

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Machinery, Agricultural Machinery, Dumbwaiter, Sugar Mills, and Kinds of Equipments
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Lower Rotation Speed
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Oscillating Base Type
Step: Three-Step

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/
To Be Negotiated 1 Piece
(Min. Order)

###

Application: Machinery, Agricultural Machinery, Dumbwaiter, Sugar Mills, and Kinds of Equipments
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Lower Rotation Speed
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Oscillating Base Type
Step: Three-Step

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

Is a worm gear reducer gearbox right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China SA37 Series Helical Bevel Worm Gearboxes     worm gearbox calculationChina SA37 Series Helical Bevel Worm Gearboxes     worm gearbox calculation
editor by CX 2023-04-19

China Nice Shape WPEX Worm Gear Speed Reducers Gearboxes Gearmotors Planetary Hypoid Helical for industrial machines aluminum worm gearbox

Guarantee: 1 12 months
Relevant Industries: Lodges, Garment Outlets, Building Content Outlets, Production Plant, Equipment Repair Outlets, Foods & Beverage Factory, Farms, Restaurant, Home Use, Retail, Meals Store, Printing Outlets, Construction works , Energy & Mining, Meals & Beverage Shops, Marketing Firm, Other
Fat (KG): 40 KG
Customized help: OEM, ODM, OBM
Gearing Arrangement: Worm
Output Torque: 1.8-2430N.M
Enter Pace: 750-1500rpm
Output Speed: 14-280rpm
clolor: Blue/gray/yellow
Packaging Information: Cartons and robust wooden circumstance for sea transporation
Port: HangZhou,ZheJiang

WP worm reducer:WP worm equipment and worm reducer is developed on the basis of wd reducer, the worm is made of 45 # high top quality metal after heattreatment processing and producing, worm equipment with tin bronze solid, put on-resisting performance is excellent, particularly on thebearing potential is more clear, is largely employed in plastics, metallurgy, beverage, mining, lifting transportation, chemical reductiondrive development and other mechanical gear.WP worm reducer attributes:1, smooth transmission, vibration, STABLECU variable pace push variator frequency inverter one section moto dc to ac vfd inverter 11kW 15HP VFD 450kW so that the effect and sound are tiny, deceleration ratio, extensive versatility, can be utilized withall sorts of mechanical equipment.2, can attain a huge transmission ratio by single stage transmission, compact structure, most kinds of reducer has betterself-locking, braking needs of mechanical products can conserve the brake device.3. The meshing friction reduction of worm screw tooth and worm equipment tooth floor is massive, so the transmission efficiency is lowerthan that of the equipment, which is inclined to heating and higher temperature.4. Greater needs for lubrication and cooling.5, good compatibility, worm gear and worm are made in accordance with nationwide expectations, bearings, oil seals and otherstandard parts.6. Types of box human body: basic kind (box entire body is vertical or horizontal composition with sole baseboard) and universal kind (box bodyis rectangular, with fixed screw holes on several sides, without having sole baseboard or with sole baseboard mounted individually)7, the enter shaft relationship method has the simple kind (one input shaft and double input shaft), with 2 kinds of motor flange.8. The position path of the output and enter axes is reduce and higher Output shaft up and down Enter axis up and down.9. Two or 3 reducer sets can be employed to form multi-phase reducer to receive the greatest transmission ratio. Packing & Shipping and delivery Packaging: In purchase to make certain the integrity of item physical appearance, we will choose cartons, wood pallets and wooden pallets in accordance to buyer requirements. ●Delivery time: Each and every reducer is produced and examined in accordance with stringent and fastened processes to make certain that the quality is right before leaving the manufacturing facility and delivery on time. ●Transportation mode: We will pick the most suitable mode of transportation for our clients according to the excess weight and dimension of the merchandise. We can also pick the mode of transportation in accordance to the needs of our buyers. ●Receiving and right after-sales service: Right after receiving the goods, make sure you check out regardless of whether they are in excellent issue. We will supply buyers with ideal after-product sales support. Business Profile HangZhou Suyishi Transmission Co., Ltd. is a skilled manufacturer and distributor of pace reducer,gearbox, electric motor, gearmotor, screw jack, couplings and other transmission products. We will serve clients at property and overseas with cost-powerful rates and steady high quality. Welcome domestic and foreign consumers to inquire and cooperate.With fast shipping and delivery, exceptional right after-product sales services, sophisticated making facility, Scorching Marketing Beautiful Construction Production Speed Reducer Wp Worm Gearbox our speed reducer offer nicely both at property and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Center East and so on. Our purpose is to create and innovate on foundation of high top quality, and create a very good status for reducers. FAQ 1. who are we?We are based in ZHangZhoug, China, start off from 2571,offer to Eastern Asia(fifty five.00%),North The usa(5.00%),Japanese Europe(5.00%),South Asia(5.00%). There are complete about 11-50 people in our business office.2. how can we guarantee top quality?Always a pre-generation sample prior to mass productionAlways ultimate Inspection before shipment3.what can you buy from us?speed reducer,Gearbox,Electric powered motor,Gearmotor,Couplings4. why ought to you get from us not from other suppliers?We have some excellent salesman ( with more than ten several years epxort expertise)5. what providers can we provide?Recognized Shipping Conditions: FOB,CFR,CIF,EXW,Convey Delivery;Accepted Payment Currency:USD,EUR,CNYAccepted Payment Variety: L/C,D/P D/A,MoneyGram,PayPal,Western Union,CashLanguage Spoken:English,Chinese,Spanish,Arabic, Gasoline Chainsaw 2 Stroke Electrical power Motor Petrol Chain Observed fifty eight CC Wood Cutter Machine For Backyard Russian Semi-Automated PET Bottle Blowing Equipment Bottle Creating Machine Bottle Moulding MachinePET Bottle Creating Machine is ideal for producing PET plastic containers and bottles in all shapes. Title goes right here.Semi-Automated PET Bottle Blowing Machine Bottle Making Device Bottle Moulding MachinePET Bottle Generating Device is appropriate for producing PET plastic containers and bottles in all shapes.

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China Nice Shape WPEX Worm Gear Speed Reducers Gearboxes Gearmotors Planetary Hypoid Helical for industrial machines     aluminum worm gearboxChina Nice Shape WPEX Worm Gear Speed Reducers Gearboxes Gearmotors Planetary Hypoid Helical for industrial machines     aluminum worm gearbox
editor by czh 2023-02-15